Hyro Dipping Pricing

All pricing applies to standard, in stock, non-special order patterns and standard base colors such as; black, white, tan, light brown and dark brown bases. These are very common colors for this process. Pricing on this page does not include candy top coats or additional coats of clear.  UV Protected Flat and Semi Gloss finished top costs are an additional 10%.  Pricing on this page does not include any disassemble or reassemble of any item. On-site professional armoring is available and highly recommended. This also applies to single color applications of Cerakote. In stock and non special order colors apply. Please inquire prior to purchase.

SHOTGUNS

Please read all foot notes carefully.

COMPLETE SHOTGUN* – $180.00
Butt stock, forearm, barrel, receiver, end cap and trigger guard.
COMPLETE OVER & UNDER SHOTGUN – $200.00
STOCK ONLY – $70.00
FOREARM ONLY – $55.00
BARREL ONLY – $85.00
RECEIVER ONLY – $65.00

PISTOLS

Please read all foot notes carefully.

COMPLETE PISTOL 6” or under – $150.00
COMPLETE PISTOL over 6” – $160.00
REVOLVER & CYLINDER – $150.00
TOP SLIDE ONLY – $75.00
FRAME ONLY – $100.00
PISTOL GRIPS – $50.00

GUN ACCESSORIES

Please read all foot notes carefully.

SCOPE RINGS & BASE – $30.00
STANDARD SCOPE – $65.00
Signature on waiver required.
LARGE OR COMPLICATED SCOPE – $85.00
CHOKE TUBE – $20.00
EXTENSION TUBE – $30.00
BOLT HANDLE – $25.00
At Owner’s Risk, bolt handle is a high wear item.
*Note: Scopes will have to be fully submerged in water. Recommend that scope be pressurized/nitrogen filled.
*Note: Complete guns do not include trigger guards, floor plates, bolts or ram rods. These items can be dipped for an additional $20 each. If there has been tape, paint or any other adhesion material or rubberized coating applied to the gun, we will charge a $20 pretreatment fee for removal. If your bow or bow parts have a rubberized coating, additional charges will apply for prep work.

ROD BUILDER PACKAGES

Please read all foot notes carefully.

Fly Rod package
Cork, reel seat, with fighting butt & rod blank – $70.00
Without fighting butt – $65.00
Spinning/Casting
(2) Corks pcs, Reel seat, rod blank – $85.00
Fishing Rod Blank – $45.00
FLY REEL – $35.00
ROD BUILDING COMPONENTS Reel seats – $25.00
CORK HANDELS cork up to 6?– $25.00, $40.00 cork 7? or more
FIGHTING BUTTS – $25.00
GUIDE SETS – $35.00
REEL SEAT BARREL – $15.00
VETRE HANDELS – $30.00
*Note: All fishing rods and blanks exceeding 8ft can not be dipped. Fly reels must come without fly line and clean of grease, etc.
*Note: Complete fishing rods will be dipped whole. Guides may not retain print well.
All rods longer than 6.5? may not be fully printing on the butt area (the last 3- 6 inches), this is due to the length of the rod and will not affect the finished product when built up.

RIFLES

Please read all foot notes carefully.

COMPLETE RIFLE barrel, stock – $180.00
BLACK POWDER RIFLE – $180.00
RIFLE STOCK ONLY – $90.00
TARGET STOCK or THUMBHOLE – $110.00
RIFLE BARREL & RECEIVER – $95.00

AR RIFLES AND PARTS

Please read all foot notes carefully.

COMPLETE AR Buttstock, Handguard, Upper/Lower, Barrel, Grip –$280.00
AR FURNITURE SET Buttstock, handguard, pistol Grip – $150.00
AR UPPER ONLY – $50.00
AR LOWER ONLY – $50.00
AR UPPER & LOWER – $95.00
BUTTSTOCK – $70.00
HANDGUARD standard – $60.00
TACTICAL GRIP – $35.00
CHARGING HANDLEL – $20.00
BARREL ONLY – $65.00
MAGAZINE 20-30 round – $30.00 Do four mags and the fifth is Free.
BIPOD – $55.00
Bipods will be double dipped and coating will not be guaranteed due to excessive wear.
XLR COMPLETE TACTICAL CHASSIS SYSTEM W/RAILS – $300.00
Includes Tactical Buttstock, Cheek piece, Chassis, chassis cap, Trigger Cover, Handguard & 4 separate rails.
XLR COMPLETE TACTICAL CHASSIS SYSTEM – $250.00
Includes Tactical Buttstock, Cheek piece, Chassis, chassis cap, Trigger Cover, Handguard.
CHASSIS AND CAP ONLY – $80.00
TRIGGER COVER – $40.00
HANDGUARD – $55.00
TACTICAL BUTTSTOCK W/CHEEK PSC – $90.00
RAILS 4 – $50.00

BOWS AND ACCESSORIES

Please read all foot notes carefully.

COMPLETE BOW – $170.00
DELUXE COMPLETE BOW PACKAGE – $225.00
Deluxe Bow package allows for substitutions: String Suppressor, Limb pockets, Limb arms, cams, quiver top, stabilizer or simple sight.
RISER ONLY – $90.00
LIMBS ONLY 2 standard or 4 split – $85.00
CAMS OR WHEELS – $40.00
LIMB POCKETS both – $30.00
LIMB POCKETS & ARMS set of 2 – $45.00
QUIVER TOP ONLY – $35.00
STABILIZER – $35.00 up to 6? or $55.00 7? or more.
QUIVER HOOD – $30.00
QUIVER – Complete non rubber parts only – $65.00
ARCHERY SITE – $85.00 and up
STRING SUPPRESSOR – $25.00
ARROW REST – $35.00
TREE STAND FLOOR, Seat base, seat bracket – $175.00
*Note: If your bow or bow parts have a rubberized or soft feel coating, additional charges will apply for removal of previous coatings.
Powder coated parts will not be stripped off unless powder coating finish is in poor condition. This may make for a snug fit (limb pockets, etc) which may need extra attention when putting
parts back together. We are not responsible for damage caused during reassembly. Powdercoating removal cost is $50.
*Note: A complete bow consists of riser and one set of limbs only. Limb pockets and limb arms which are not attached to the riser and are a separate piece will be extra as listed above. All bows must be disassembled. If a bow arrives assembled, we reserve the right to charge $25 to disassemble, and it will not be re-assembled. Oneida Bows have 4 regular sized limbs, which will be an extra $75 to coat.
*Newer style risers may need to be double dipped in order to completely cover the whole riser. This is due to the amount of “holes or cutouts” that the riser may have. This process may give the final product a darker looking finish.
*Stabilizer prices may vary. Price is for a typical 6? stabilizer.